|
Worktop Lift - Adjustable Height Counters - BASELIFT
|
|
| |
|
| |
|
Can be fitted with drawers.
|
|
|
Cover panels conceal the wall and wiring. |
|
|
Sink unit and hob can be inserted in the lift. |
|
|
Movable motors and free space at the wall beneath the motorised leg simplify the moving of electric, water and drain connections. |
|
|
| |
| |
|
|
# |
Item
No. |
Lift
Width |
Planning Width |
Price |
QTY |
Add
to Cart |
|
|
| |
|
|
More Information
|
|
|
| |
 BASELIFT 6200 adjusts the height of the work surface on a straight wall.
Worktops with a depth of 56-61 cm are mounted on the lift.
The worktop lift is adapted to allow the installation of an inset sink unit, hob and drawers.
Control:
The work surface is adjusted to the optimal height simply by pushing a button.
Choose between recessed button or optional remote control.
Safety:
Overload protection: If it is overloaded, the lift stops.
Safety buffer:
Located under the front edge of the worktop. When the buffer is touched, the lift stops.
|
|
| |
|
|
|
|
| |
When planning, note the following points:
|
|
Available in widths from 59 - 340 cm. Adjustable frame depth 56 - 58 cm. |
|
The lift is adjusted to the front height 11.8 cm. |
|
Check the condition of the wall (material, positioning of bolts).
Plaster walls must be strengthened. |
|
Water, drain and electric connections are positioned below or to the side of the motorised leg. (See diagram below). |
|
Is the lift to be fitted with an inset sink unit or a complete sink unit? |
|
Will the lift have drawers or chopping boards? (If so, where?) |
|
Which control unit is required?
An area of 9 cm x 9 cm is required for a recessed control button |
|
There must be 0.5 cm clearance between the adjacent cabinet and the lift to allow space for movement. |
|
Fittings for installing fronts and cover panels included. |
|
The lift allows 1.5 cm clearance at the wall for wall covering. |
|
|
| |
|
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
BASELIFT 6200 comprises two parts. Motorised leg and pre-mounted frame system in aluminium. |
 |
|
The motorised leg is screwed to the wall. |
|
The frame system is fitted on the motorised leg and adjusted for width, depth and inclination. |
|
The control unit is plugged into the wall socket |
|
Fronts, worktop, any sink unit, hob etc. are mounted. |
|
| |
| |
|
|
| |
|
| |
| |
| |
Need
help choosing which products are right for you?
Call us toll-free:
1-877-717-7027 |
| |
|
Worktop Lift Baselift Brochure