| Design: A motor with lifting belt
moves a cassette up and down in relation to the workshop. Linear
guidance for the up/down travel secured to a vertical rear panel.
The total travel is 50cm. |
 |
| Safety: Anti-crushing protection:
A trip panel is provided under the bottom. On the sides, there is
a gap between the shelves and the cabinet wall. An upright plate
is provided at the rear of every shelf. At the top, anti-crushing
protection is provided to prevent damage to tall items on the shelf.
Trip functions are provided at the top and bottom of the vertical
travel. |
| Materials: Aluminum, steel sheet,
coated chipboard panels, electronic parts, belt. |
| Colors: Natural aluminum, white
chipboard panels, electronic parts, belt. |
| Loading: The maximum load on the
cassette: 40kg. |
| Travel: 50cm. |
| Dimensions: The rear panel of the
cassette is 67.9cm high. The panel is made for a minimum cabinet
height of 70cm. If the cabinet is taller, a shelf is fitted above
the cassette. The space can be used for storage. Width: for 50,
60, 70, 80, 90 and 100cm cabinets. The cassettes are available in
two depths: shallow model with a total depth of 26.6 cm - deep model
with a total depth of 31cm. |
| Connections: Electrical: The transformer
is designed for connection to a grounded 230V wall socket. The transformer
is designed for 24V and its consumption is 160VA. Several Verti
units can be run from the same transformer. |
Control: Standard: Push-buttons
with 5m long cable.
Option 1: Manual control with spiral cable.
Option 2: Remote control. |
| Installation: Remove the buttons
and shelves of the cabinets and also the rear panel if it is not
up against the wall. Secure the cassette to the wall by means of
the brackets and connect the transformer to the power supply socket.
Install the up/down buttons in a convenient location. |
| All electrical components are CE marked
or conform to our requirements |