SLIMLIFT Worktop Lift adjusts the height of the work surface on a straight wall.
Worktops with a depth of 22" - 31 1/2" (56-80 cm) are mounted on the lift. The width can be adapted as required as the design permits the worktop to be mounted with an overhang of up to 4" (10 cm) on either side of the lift.
Features
- Check the condition of the wall (material, positioning of bolts). Reinforce plaster wall with horizontal cross bars as shown in the diagram.
- Water, drain and electrical connection are placed to the side of the motorised leg.
- There must be 1/4" ( 0.5 cm) clearance between the adjacent cabinet and the worktop to allow space for movement.
- The lift allows 9/16" (1.5 cm) clearance at the wall for wall covering.
- Installation:
- The SLIMLIFT 6230 comprises three parts. Aluminium beam, brackets and motorised leg.
- The motorised leg is placed on the floor and screwed to the wall.
- The aluminium beam is fitted to the motorised leg and adjusted by width and depth.
- The brackets are slid onto the aluminium beam.
- The control unit is plugged into the wall socket
- Worktops and any fronts, sink unit, hob, etc. are mounted.
